Charge your vehicle safely and efficiently at 10Amps with our Classic Plus 3.0 Type 1 EV Charger Cable.

This portable charger has a temperature sensor at the pins to allow 10 amp charging.
DO NOT ever buy a portable 10 amp charger without confirmation the plug has temperature sensing.
Simple and easy to use, just plug in and let your car charge at your choice of 6, 8 or 10 Amps.

This 8.2m (total length) charging cable is suitable for domestic situations and has safety features for peace of mind charging at home. Our well-engineered cable is made to IEC 62752, the latest and toughest standard for portable charging equipment. And also learn more about IEC 60529 here.

Compatibility

Suitable for vehicles with a Type 1 inlet, typically found in Japanese imports or early model NZ new vehicles.

If you have any doubts about compatibility, please don’t hesitate to contact our knowledgeable team at our fully equipped showroom. Nearly every EV or PHEV sold in Japan as a new car is a Type 1; whether the car was 2011 manufactured or 2025, it will still be a Type 1.

Features

LCD screen with full rotating readout – Amp display, temperature display, time charging, and kWh delivered. This cable importantly has the reset feature for minor faults detected in the power supply. It’s perfect for Type 1 PHEV charging too.

Please provide all Portable Charging Cables with some shelter during use from persistent rain. EV portable charging cables are water resistant, not waterproof or submersible. Please see our wall mounted Premium EV Cable Holder to store the Classic Plus 3.0 up off the ground.

Working Current: 6, 8 or 10A Switchable
Water-resistance – IP-65 learn more about IP Ratings here.
10,000 Charging Cycles
Cable Strain Relief Feature – endures 100kg of weight on the main box
Auto charge recovery
Overcurrent protection
Insulated Terminal Design
Overvoltage protection
Lightning protection
Electric leakage protection
Earth leakage protection
Temperature sensor at the three pins
6mA DC detection

Specifications

Working Voltage: 240V AC
Cable Length: 8.2 m end to end
Charging Plug: Type 1 Plug
30 mA AC + 6 ma DC detection as an alternative to RCD type B
Power Plug: 3-pin New Zealand/Australia Plug with temperature sensor at pins for added safety.
Rated Power: 2.2kw
Voltage Range: 230V ± 10%
LCD panel indicates charging status
Operating Temperatures: -30° To +50°

Complies fully with IEC 62752. SDoC is available on request.