Charge your vehicle safely and efficiently with our Classic Plus 3.0 Type 2 EV Charger Cable.
This EV Power Type 2 Plug is designed to provide NZ-new and Euro EV/PHEV’s reliable charging at up to 10 Amp with new and improved super tough construction – it also features 6 mA DC detection and Delayed Start (up to 12hrs). This portable charger has a temperature sensor at the pins to allow 10 amp charging.
**DO NOT ever buy a portable 10 amp charger without confirmation the plug has temperature sensing.
- 8.2m long (total length) charging cable.
- Set to your choice of 6, 8 or 10 Amps.
- Suitable for domestic situations.
- Safety features for peace of mind charging at home.
- Our well-engineered cable is made to IEC 62752, the latest and toughest standard for portable charging equipment.
Please see our wall mounted Premium EV Cable Holder to store the Classic Plus 3.0 up off the ground.
Compatibility
Suitable for vehicles with a Type 2 inlet, typically found ex-UK and NZ new vehicles. If you have any doubts about compatibility, please don’t hesitate to contact our knowledgeable team at our fully-equipped showroom.
Please provide all Portable Charging Cables with some shelter during use from persistent rain. EV portable charging cables are water resistant, not waterproof or submersible. Learn more about IEC 60529 here
Features
- Working Current: 6, 8 or 10A Switchable.
- Delayed start of up to 12 hours.
- Cable Length: 8.2 m end to end.
- Charging Plug: Type 2 Plug.
- Power Plug: New Zealand/ Australia Plug with temperature sensor at pins for added safety.
- Auto charge recovery.
- Overcurrent protection.
- Insulated Terminal Design.
- Overvoltage protection.
- Lightning protection.
- Electric leakage protection.
- Earth leakage protection.
- Temperature sensor at the three pins.
- 6mA DC detection.
- Cable Strain Relief Feature – endures 100kg of weight on the main box.
- LCD screen with full rotating readout – Amp display, temperature display, time charging, and kWh delivered.
- Reset feature for minor faults detected in the power supply.
Specifications
- Working Voltage: 230V AC.
- 30 mA AC + 6 ma DC detection as an alternative to RCD type B.
- Rated Power: 2.2kw.
- Voltage Range: 230V ± 10%.
- LCD panel indicates charging status.
- Operating Temperatures: -30° To +50°.
- Water-resistance – IP-65.
- 10,000 Charging Cycles.
- Complies fully with IEC 62752/IEC62196-2 and AS/NZS 3820. SDoC is available on request.
Do not use with extension cord or multi box.
Warranty
2-year warranty.
